Tectyl™ 120
Underbody CoatingsPremium general purpose, corrosion preventive compound
Tectyl 5638W is a water dispersed, fast drying, sound damping compound. Cures to a black, hard film.
Tectyl 5638W is very suitable for industrial application on cars, trains, and other rolling equipment.
Tectyl 5638W can be used for sound and vibration reduction on vehicle parts; doors, hoods, gear coverings, etc., air ventilation systems, glass and garbage containers, machine constructions and boiler covers in the heating sector.
Tectyl 5638W can be applied with a spatula or with special spray equipment.
Tectyl 5638W can be painted over, when dry, with synthetic resin-, epoxy- and PVC-based paints.
Tectyl 5638W is fast drying, by evaporation of water, to a black, hard film.
Tectyl 5638W dampens vibrations and reduces sound.
Tectyl 5638W is a water-based compound with a minimum amount of Volatile Organic Compound Content. The product is pH neutral.
Surface Preparation
The maximum performance of Tectyl 5638W can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Non-galvanized steel and raw aluminum must be protected with an anti-corrosion primer prior to application of Tectyl 5638W.
Application
Tectyl 5638W is formulated to be used as supplied. Ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5638W. Small areas of Tectyl 5638W can be applied with a spatula. For larger areas spraying is advised. CorPro recommends the use of a stainless steel airless spray system. Details on application can be found in the application chart.
Removal
When in the wet phase Tectyl 5638W can be removed with (hot) water. When dry, Tectyl 5638W can be removed with Ethyl Acetate.
Storage
Tectyl 5638W should be stored at temperatures between 10-35 °C. Do not freeze Tectyl 5638W. Mild agitation is recommended prior to use. Due to its composition Tectyl 5638W can be subject to postproduction viscosity changes during storage. Under proper storage conditions Tectyl 5638W is best before 12 months after production date.
