Find clear and practical answers to the most common questions about Tectyl products, applications, and corrosion protection solutions. This section is designed to help you quickly access the information you need.
Yes. Tectyl supports OEMs and industrial partners with product selection, application guidance and technical documentation. Our goal is to deliver reliable, cost-effective corrosion protection systems tailored to your production environment.
The correct equipment depends on the product type, viscosity, required film thickness, and production setup.
High-build underbody coatings typically require airless spray systems to achieve a consistent film thickness.
Cavity waxes are usually applied using low-pressure air spray systems with specialized nozzles.
Oil-based products may be applied by dipping or circulation systems in industrial environments.
For optimal results, equipment settings should match the product specification. We recommend consulting the Product Information Sheet and contacting our technical team to ensure the correct pump ratio, nozzle size, and pressure settings.
Each product has a specified minimum dry film thickness to achieve optimal corrosion resistance. Underbody and heavy-duty systems typically require higher film builds (e.g., 200–350 micron or more), while temporary storage coatings may require significantly less. Always refer to the Product Information Sheet for exact specifications.
For industrial vehicles, chassis modules and equipment exposed to abrasion and stone chipping, high-build underbody coatings are recommended. These systems are designed to provide strong mechanical resistance combined with long-term corrosion protection in aggressive environments.
Tectyl products are designed to prevent corrosion. Loose rust should always be removed before application to ensure proper adhesion and long-term protection.
For active rust treatment, we recommend using a dedicated rust converter such as Tectyl 5401W RC, which stabilizes corrosion before applying a protective coating.
After proper preparation, apply a suitable cavity wax or underbody coating to ensure long-lasting protection.
Wheel arches are exposed to moisture, road salt and stone chipping. For durable protection, we recommend using a high-build underbody coating such as Tectyl Bodysafe or Tectyl 190 Black, which provide strong abrasion resistance and long-term corrosion protection.
Always ensure the surface is clean and dry before application.
Yes. Tectyl multipurpose corrosion protection products are ideal for protecting tools, gardening equipment, bolts and other metal parts stored indoors or outdoors.
For general use, we recommend Tectyl Multi Purpose 506 or Tectyl Multipurpose Amber (aerosol), which provide strong water displacement and reliable rust prevention.
If a transparent protective layer is preferred, Tectyl Multi Purpose Clear offers durable protection while allowing visual inspection.
Apply to clean and dry surfaces for best results.
Yes. Tectyl offers water-based corrosion protection systems designed to reduce VOC emissions and minimize solvent odor, while maintaining reliable long-term performance.
For automotive and DIY applications, we recommend Tectyl Multipurpose Waterbased, which provides durable corrosion protection with a lower environmental impact compared to traditional solvent-based coatings.
Water-based technologies support improved workplace conditions, reduced emissions, and easier compliance with environmental regulations without compromising protection.