Tectyl™ 127 CGW
General Corrosion PreventivePremium wax based, corrosion preventive compound
Tectyl 506-EH is a solvent cutback, wax base, general purpose, corrosion preventive compound suitable for the widest range of application requirements for vehicle rustproofing, protection of machinery and parts in storage.
Tectyl 506-EH protects parts in indoor and outdoor storage as well as domestic and international shipments.
Tectyl 506-EH cures to a dark amber colored, waxy, translucent, firm film. Tectyl 506-EH is the Extra Heavy version of Tectyl 506.
At the recommended DFT Tectyl 506-EH will protect against corrosion during storage, domestic and overseas transport.
Tectyl 506-EH can protect parts stored outside as well, due to its excellent corrosion protection.
Tectyl 506-EH is easy to apply and easy to remove, when no longer needed.
With a DFT of only 50 microns, Tectyl 506-EH can protect a large surface with just little amount of the product.
Surface Preparation
The maximum performance of Tectyl 506-EH can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale and a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 506-EH is formulated to be used as supplied. Due to its composition, Tectyl 506-EH may be subject to post-production viscosity changes and/or wax buildup. Always ensure a homogeneous consistency by stirring before use. If the product becomes thick due to cold storage or loss of solvent during application, dilution with max. 1-2% Tectyl 150 is possible to achieve the desired consistency. Incorrect dilution will affect film formation, drying time and possibly product performance. Tectyl 506-EH can be applied by low pressure air spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 506-EH can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 506-EH can be removed with Tectyl Biocleaner or Tectyl 150.
Storage
Tectyl 506-EH should be stored at temperatures between 10-35 °C. Do not freeze Tectyl 506-EH. Mild agitation is recommended prior to use. Due to its composition Tectyl 506-EH can be subject to postproduction viscosity changes during storage. Under proper storage conditions Tectyl 506-EH is best before 36 months after production date.
