Tectyl™ 127 CGW
General Corrosion PreventivePremium wax based, corrosion preventive compound
Tectyl 511-M is a solvent cutback, water displacing, oil-based corrosion preventive compound.
Tectyl 511-M meets the performance requirements of Military Specification MIL-PRF-16173E Grade, Grade 5, Class 1.
Tectyl 511-M is designed to protect ferrous and non-ferrous industrial parts and transportation components during covered shipment and inside storage.
Tectyl 511-M cures to a light amber colored, transparent oily film.
At the recommended DFT Tectyl 511-M will protect against corrosion during storage and domestic transport.
Tectyl 511-M is easy to apply and easy to remove, when no longer needed.
With a DFT of only 7.5 microns, Tectyl 511-M can protect a large surface area with just a little amount of the product.
Surface Preparation
The maximum performance of Tectyl 511-M can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 511-M is formulated to be used as supplied. Do not thin Tectyl 511-M. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 511-M can be applied by low pressure air spray or dipping. Details on application can be found in the application chart.
Removal
Tectyl 511-M can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 511-M can be removed with Tectyl Biocleaner or Tectyl 150.
Storage
Tectyl 511-M should be stored at temperatures between 10-35 °C. Do not freeze Tectyl 511-M. Mild agitation is recommended prior to use. Due to its composition Tectyl 511-M can be subject to postproduction viscosity changes during storage. Under proper storage conditions Tectyl 511-M is best before 36 months after production date.
